Comparative Analysis of the Methods of Planning and Coordinating of Manipulator Robot Movement

Authors

DOI:

https://doi.org/10.18372/1990-5548.81.18991

Keywords:

robot manipulators, trajectory planning, neural networks, dynamic environments, collision avoidance, intelligent control systems, automated processes, real-time adaptation, production scenarios

Abstract

This paper presents a comparative analysis of two methods for planning and coordinating the movement of robot manipulators in dynamic environments: a neural network-based approach for solving dynamic production scenarios and the rapidly exploring random trees algorithm. The study aims to enhance the trajectory planning of robot manipulators by leveraging the strengths of intelligent systems. The neural network method is designed to perceive the environment, generate accurate control commands, and adapt to changing conditions in real-time. The paper the processes involved in environmental analysis, collision avoidance, and control signal generation for actuators, with an emphasis on the neural network architecture tailored for these tasks. The results demonstrate that the neural network approach offers significant improvements in adaptability and efficiency, providing a robust solution for optimizing automated processes in dynamic production environments.

Author Biographies

Victor Sineglazov , National Aviation University, Kyiv

Doctor of Engineering Science

Professor

Head of the Department Aviation Computer-Integrated Complexes

Faculty of Air Navigation Electronics and Telecommunications

Volodymyr Khotsyanovsky, National Aviation University, Kyiv

Post-graduate Student

Faculty of Air Navigation, Electronics and Telecommunications

References

A. V. Duka, “Neural Network based Inverse Kinematics Solution for Trajectory Tracking of a Robotic Arm,” Procedia Technol, 12, 20–27, 2014. https://doi.org/10.1016/j.protcy.2013.12.451

D. G. Arseniev, L. Overmeyer, H. Kälviäinen, and B. Katalinić, Cyber-Physical Systems and Control, Springer: Berlin/Heidelberg, Germany, 2019. https://doi.org/10.1007/978-3-030-34983-7

S. Islam, and X. P. Liu, “Robust Sliding Mode Control for Robot Manipulators,” IEEE Trans. Ind. Electron, 58, 2011, 2444–2453. https://doi.org/10.1109/TIE.2010.2062472

M. J. Yazdanpanah and G. Karimian Khosrowshahi, Robust Control of Mobile Robots Using the Computed Torque Plus H∞ Compensation Method. Available online: https://www.sciencegate.app/document/10.1109/cdc.2003.1273069

V. M. Sineglazov and V. P. Khotsyanovsky, “Adaptive Control of Manipulator Robots in a Dynamic Environment Using Neural Networks,” Electronics and Control Systems, no 2(80), pp. 36–42, 2024. https://doi.org/10.18372/1990-5548.79.18441

V. M. Sineglazov and V. P. Khotsyanovsky, “Method of Planning and Coordination of Robot Movement Using Neural Networks for Solution of Dynamic Production Scenarios,” Electronics and Control Systems, no. 1(79), pp. 48–53, 2024. https://doi.org/10.18372/1990-5548.80.18682

C. C. Wong, C. J. Chen, K. Y. Wong, and H. M. Feng, “Implementation of a Real-Time Object Pick-and-Place System Based on a Changing Strategy for Rapidly-Exploring Random Tree,” Sensors, 23(10), 4814, 2023. https://doi.org/10.3390/s23104814

J. G. Kang, & J. W. Jung, Post triangular rewiring method for shorter RRT robot path planning, 2021. arXiv preprint arXiv:2107.05344. https://doi.org/10.5391/IJFIS.2021.21.3.213

J. Yu, M. Wu, J. Ji, & W. Yang, “Neural network-based region tracking control for a flexible-joint robot manipulator,” Journal of Computational and Nonlinear Dynamics, 19(2), article number 021003, 2023. https://doi.org/10.1115/1.4064201

Downloads

Published

2024-09-30

How to Cite

Sineglazov , V., & Khotsyanovsky, V. (2024). Comparative Analysis of the Methods of Planning and Coordinating of Manipulator Robot Movement. Electronics and Control Systems, 3(81), 48–53. https://doi.org/10.18372/1990-5548.81.18991

Issue

Vol. 3 No. 81 (2024)

Section

AUTOMATION AND COMPUTER-INTEGRATED TECHNOLOGIES

License

The scientific journal “Electronics and control systems” adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.

All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Copyright

Authors who publish their works in the journal “Electronics and control systems”:

  • retain the copyright to their publications;

  • grant the journal the right of first publication of the article;

  • agree to the distribution of their materials under the CC BY 4.0 license;

  • have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.