ADJUSTABLE LOAD FOR AUTOMATIC TESTING OF DC POWER SUPPLY

Authors

  • O. V. Statsenko National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
  • D. S. Nedashkivsky National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

DOI:

https://doi.org/10.18372/1990-5548.58.13517

Keywords:

Electronic load, energy recovery, testing of power supplies

Abstract

This article is devoted to the development of adjustable electronic load for direct current power supply testing systems. The structure of the electronic loadunit, which allows to regulate the currents of the tested source and carry out the recovery of energy to the electrical grid, is described in the article. The structure of thisunit includes booster converters, working on a common direct current link, full-bridge inverter, smoothing filter and electrical grid transformer. The basic relationships for element parameters calculation of constituent parts are determined. The control devices of converters and inverter, in which relay current regulation is implemented, are developed. In the Matlab Simulink software environment a model of the proposed electronic load is realized. With the use of developed model researches were conducted, which confirmed the ability of the proposed electronic load to regulate input currents and perform energy recovery.

Author Biographies

O. V. Statsenko, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

Department of Experimental Research Automation, Faculty of Instrumentation Engineering

Candidate of Science (Engineering). Associate Professor

D. S. Nedashkivsky, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

Department of Experimental Research Automation, Faculty of Instrumentation Engineering

Student

References

V. Shakhnov, O. Berezin, A. Skripko, and V. Kostikov, Design of power supplies for electronic equipment. Moscow: Knorus Prospekt, 2013, 532 p. (in Russian)

A. V. Vasil'kov, Power sources. Moscow: Forum, 2015, 400 p. (in Russian)

V. V. Podgornyy, Sources of secondary power supply. Moscow: Goryachayaliniya-Telekom, 2013, 150 p. (in Russian)

A. P. Kashkarov, Pulsed power sources. Circuit design and repair. Moscow: DMK Press, 2014, 184 p. (in Russian)

A. Shadeyko, “Universal test benches for testing secondary power sources and voltage converters, ”Silovaya elektronika, no. 2, pp. 84–85, 2012.

Stand for testing power supplies or excitation units: Pat. RU 87034 U1: MPK G09B 23/18. No. 2009107684/22; declare 03/03/2009; publ. 20.09.2009, Byul. no. 26. 6 p.

Stand for examination, testing and analyzing computer power supplies: Pat. RU 2548577 C1: MPK G01R 1/00. No. 2013158598/28; declare 12.27.2013; publ. 04/20/2015, Byul. no. 11, 10 p.

Power supply testing system: Pat. US 8330448 B2: MPK G01R 1/00, G01R 31/40, G01D3/00. Appl. No.: 12/765, 588; Date of Patent: Dec. 11, 2012.

Power supply unit testing system: Pat. US 2013/0249576A1: MPK G01R 31/40. Appl. No.: 13/726, 150; Date of Patent: Sep. 26, 2013.

V. I. Meleshin, Transistor Conversion Technology. Moscow: Tekhno sfera, 2006, 632 p. (in Russian)

S. G. German–Galkin, “Computer modeling of semiconductor systems in Matlab 6.0,” Proc. allowance. St. Petersburg: KORONA print, 2001, 320 p.

Downloads

How to Cite

Statsenko, O. V., & Nedashkivsky, D. S. (2018). ADJUSTABLE LOAD FOR AUTOMATIC TESTING OF DC POWER SUPPLY. Electronics and Control Systems, 4(58), 101–107. https://doi.org/10.18372/1990-5548.58.13517

Issue

Vol. 4 No. 58 (2018)

Section

MATHEMATICAL MODELING OF PROCESSES AND SYSTEMS

License

The scientific journal “Electronics and control systems” adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.

All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Copyright

Authors who publish their works in the journal “Electronics and control systems”:

  • retain the copyright to their publications;

  • grant the journal the right of first publication of the article;

  • agree to the distribution of their materials under the CC BY 4.0 license;

  • have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.