SOLIDWORKS-COSMOSWORKS PACKAGE ADAPTATION FOR THE SOLUTION OF PROBLEMS OF MODELLING OF COOLED SHOVELS OF GAS TURBINES THERMOINTENSE CONDITIONS

Authors

  • Б. Карпінос National Aviation University
  • В. Куліш G.S. Pisarenko Institute for Problems of Strength of the National Academy of Sciences of Ukraine

DOI:

https://doi.org/10.18372/2310-5461.14.5340

Keywords:

stress, temperature, finite elements, error

Abstract

For integral plate and plate with a hole analytical and numerical results for two test problems thermal and thermotension slate are given . Results of calculation have shown, that SolidWorks-COSMOSWorks package can be effectively used for solution of material states modeling tasks of cooled gas turbine blade.

References

Mazur Z., Luna-Ramirez-Islas J.A., Campos-Amezcua A. Failure analysis of a gas turbine blade made of Inconcl 738LC alloy. – Engineering FailureAnalysis 12(2005). – P. 474-486.

Bangerth W. Adaptive Finite Element Mathods for Differential Equations Birkhauser Verlag / W. Bangerth, R. Rannacher. – Basel-Boston-Berlin. – 2000. – 126 p.

George P-L. Delaunay Triangulation and Meshing : Application to Finite Elements / P-L George, H. Borouchaki. – Paris : Hermfes, 1998. – 414 p.

Kirsch G. Die Theorie d. Elastizitat u. d. Bedurfnisse d. Festigkeitsiehre, V.D.J. m.42. № 29, 1898, S.799.

Савин Г.Н. Концентрация напряжений около отверстий. – М.: Л.: Гос. Изд-во техн.-теорет. Лит. – 1951. – 496с.

Neuber H. Theory of notch stresses. Ann Arbor. Michigan: J.W. Edwards / H. Neuber. 1946. – М.;Л.: Гостех-изд. 1947. – 204 с.

Мавлютов Р.Р. Концентрация напряжений в элементах авиационных конструкций / Р.Р. Мавлютов. – М.: Наука. 1981. – 142 с.

Howland R.C.J. On the Stresses in the Nelghbourhood of a Circular Hole in a Strip Under Tension. Phil. Trans. Roy, Soc., London, Ser. A. – Vol. 229. – 1930. – P. 39.

Алямовский А.А. SolidWorks/COSMOSWorks. Инженерный анализ методом конечных элементов / А.А. Алямовский. – М.: ДМК Пресс. 2004. – 432 с.

Лыков А.В. Теория теплопроводности / А.В. Лыков. – М.: Высш. шк., 1967. – 600 с.

Downloads

Published

2012-04-17

How to Cite

Карпінос, Б., & Куліш, В. (2012). SOLIDWORKS-COSMOSWORKS PACKAGE ADAPTATION FOR THE SOLUTION OF PROBLEMS OF MODELLING OF COOLED SHOVELS OF GAS TURBINES THERMOINTENSE CONDITIONS. Science-Based Technologies, 14(2), 22–26. https://doi.org/10.18372/2310-5461.14.5340

Issue

Vol. 14 No. 2 (2012)

Section

Avionics and Engineering

License

The scientific journal adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.

All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Copyright

Authors who publish their works in the journal:

  • retain the copyright to their publications;

  • grant the journal the right of first publication of the article;

  • agree to the distribution of their materials under the CC BY 4.0 license;

  • have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.