COMBINED TREATMENT AND WEAR MECHANISM OF NITRIDED COATINGS ON TITANIUM ALLOY VT-6
DOI:
https://doi.org/10.18372/0370-2197.2(103).18694Keywords:
titanium alloy, wear, nitriding, laser treatment, wear intensity, nitrided layerAbstract
The wear process in the tribological system: nitrided titanium alloy - hydraulic fluid - steel is studied. It is shown that the level of wear is determined by tribological structures of the dissipative type, which are self-formed at the evolutionary stage of running-in. Using a linear approximation of the Boltzmann transfer equation, the exponential nature of the running-in stage was established, at which the wear intensity decreases from the initial to the steady-state level and then fluctuates around a constant mean with a constant variance. AMG-10 liquid selectively interacts with the elements. Electronegative elements dissolve in the lubricant, while electropositive elements are transferred to the counterbody, interact with the products of the mechanical destruction of lubricant molecules, and take an active part in the formation of the tribostructure, which reduces the level of direct interaction of the solids in contact. Preliminary laser treatment of titanium alloy activates the process of subsequent nitriding, which makes it possible to reduce the nitriding time while increasing the thickness of the wear-resistant nitrided layer. The use of laser pretreatment on real parts makes it possible to increase the service life of friction units and reduce production costs during their manufacture.
References
Kombinovani metodi inzheneriyi poverhni: monografiya / M.V. Kindrachuk, O.I. Duhota, V.Ye. Marchuk, I.A. Gumenyuk, V.V. Kharchenko.- K.: NAU, 2024. – 160 s.
Kindrachuk M. V. Vliyanie predvaritelnoj lazernoj obrabotki na process azotirovaniya titanovogo splava VT6 / M. V. Kindrachuk, A L. Shevchenko, V. A. Kostin i dr. // Problemi tertya ta znoshuvannya: nauk.-tehn. zb. – K.: Vid-vo NAU «NAU-druk», 2010. – Vip. 52. – S. 140–151.
Kharchenko V. Kombinovani metodi inzheneriyi kontaktnih poverhon tribologichnih sistem / I. Gumenyuk, A. Korniyenko, M. Ivanickij // Problemi tertya ta znoshuvannya. - 2024.- №1 (102). S. 23 - 27. https://doi.org/10.18372/0370-2197.1(102).18414
Kindrachuk M.V. Materialoznavstvo: pidruchnik / M.V. Kindrachuk, V.F. Labunec, T.S. Klimova, I.G. Chernish. – Kiyiv, „NAU – druk”. – 2012. – 500s.
Kindrachuk M. V. Pidvishennya znosostijkosti plazmovih evtektichnih pokrittiv termociklyuvannyam lazerom/ V. V. Kharchenko, O. V. Tisov, I.A. Gumenyuk, N. M. Stebelecka, A. O. Yurchuk, L. A. Glovin // Problemy tertya ta znoshuvannya.- 2021.- №1. S. 78 – 85. https://doi.org/10.18372/0370-2197.1(90).152506.
Zeldovich Ya. B. Peremezhaemost v sluchajnyh seredah /Ya. B. Zeldovich // UFN. – T. 152, vyp. 1. – 1987. – S. 33 – 41.
Kindrachuk M. V. Formuvannya diskretnoyi strukturi azotovanih pokrittiv rivnoyi znosostijkosti/ V.V. Kharchenko, O.I. Duhota, I.A. Gumenyuk // Problemi tertya ta znoshuvannya - 2022. - №4 (97). S. 4-9. https://doi.org/10.18372/0370-2197.4(97).16954
Tisov, O. Duplex Aging and Gas Nitriding Process as a Method of Surface Modification of Titanium Alloys for Aircraft Applications/ Łępicka, M., Tsybrii, Y., Kindrachuk, M., // Metals, 2022, 12(1), 100 https://doi.org/10.3390/met12010100
Downloads
Published
How to Cite
Issue
Section
License
The scientific journal adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.
All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.
Copyright
Authors who publish their works in the journal “Electronics and control systems”:
-
retain the copyright to their publications;
-
grant the journal the right of first publication of the article;
-
agree to the distribution of their materials under the CC BY 4.0 license;
-
have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.