ASSESSMENT OF THE ENERGY CONSUMPTION OF FRICTION COUPLES OF DISC-PAD BRAKE DEVICES
DOI:
https://doi.org/10.18372/0370-2197.4(109).20760Keywords:
disc-pad brake, friction pair, friction lining, brake disc, local potentialAbstract
The materials of the article have conducted studies of energy loading in relation to vehicle disc brakes, which allowed us to establish the following: specific heat losses in the disc friction zone change in time according to the law of simple harmonic oscillation with the same oscillation period as the ambient temperature oscillation period, but with a phase shift; it has been confirmed by calculation that the thin surface layer of the disc friction zone is subjected to cyclic thermal loading of an impulse and long-term nature during vehicle braking modes, after which thermal waves penetrate deep into the thickness of the brake disc; the main parameter of the energy loading of friction pairs is the local temperature gradient in the zone of local frictional interaction of their microprotrusion contact spots, which significantly affects the operational parameters of the brake with its fluctuation properties; the local potential acts as a function of the fluctuating temperature and the established temperature of the brake friction pairs.
References
Dzhanakhmedov A.Kh. Physico-stochastic modeling /A.Kh. Dzhanakhmedov. – Baku, 1988. – 152 p.
Disc and disc-pad lining in machine-made equipment / A. Kh. Dzhanakhmedov, D. A. Volchenko, N. A. Volchenko, V.S. Violinist [ta ін] // Baku: “Apostrof-A”. In 3 volumes. Volume 1, 2020. – 376 p.
Disc and disc-pad lining in machine-made equipment / A. Kh. Dzhanakhmedov, D. A. Volchenko, N. A. Volchenko [ta in.] Volume 2. Baku: "APOSTROF-A", 2021. - 392 p.
Patterns of changes in process characteristics, manifesting effects in working balls of metal-polymer pairs during electrothermo-mechanical rubbing / A. M. Pashaev, A. Kh. Dzhanakhmedov, D. A. Volchenko [etc.] // Bulletin Azerbaijani engineering academies. - Baku. – 2014. – No. 6 (1). – P. 7 – 24.
Kindrachuk, M.V., Vol’chenko, А.I., Vol’chenko, D.А. et al. Energy Levels of Different Types of Contacts of Microirregularities of Friction Couples. Mater Sci 54, 843–854 (2019).
N. A. Volchenko, P. S. Krasin, D. A. Volchenko, A. V. Voznyi. Electrochemistry with double electrical layers in frictional interaction metal-polymer tribolink. IOP Conference Series: Materials Science and Engineering, Volume 327, Issue 3.
Kindrachuk, M.V., Vol’chenko, D.A., Vol’chenko, N.A. et al. Influence of Hydrogen on the Wear Resistance of Materials in the Friction Couples of Braking Units. Mater Sci 53, 282–288 (2017).
Volchenko, N., Volchenko, A., Volchenko, D., Poliakov, P., Malyk, V., Zhuravliov, D. et al. (2019). Features of the estimation of the intensity of heat exchange in self-ventilated disk-shoe brakes of vehicles. Eastern-European Journal of Enterprise Technologies, 1 (5 (97)),
–53.
Kernytskyy, I., Volchenko, A., Szlachetka, O., Horbay, O., Skrypnyk, V., Zhuravlev, D. et al. (2022). Complex Heat Exchange in Friction Steam of Brakes. Energies, 15 (19), 7412.
Janahmadov, A. K.; Volchenko, D. A.; Volchenko, N.A. Design and Verification Calculation of Frictional Units of Tape-Shoe Brakes of Drawworks; Azərbaycan Mühəndislik Akademiyası: Baku, Azerbaijan, 2016. (In Russian).
Skripnik, V., Vudvud, O., Zhuravlev, D., Nikipchuk, S., Danulyak, T. (2023). The Efficiency of Convective Heat Exchange at the Airflow of Metal Friction Elements of Brakes. In: Tonkonogyi, V., Ivanov, V., Trojanowska, J., Oborskyi, G., Pavlenko, I. (eds) Advanced Manufacturing Processes IV. InterPartner 2022. Lecture Notes in Mechanical Engineering. Springer, Cham.
Kim, Y-G., et al. "Measurement of the disc-pad friction coefficient for mechanical brakes using direct and indirect methods." International journal of automotive technology 12.1 (2011): 51-58.
Qi, Hong Sheng, and Andrew J. Day. "Investigation of disc/pad interface temperatures in friction braking." Wear 262.5-6 (2007): 505-513.
Demir, A., R. Samur, and I. Kilicaslan. "Investigation of the coatings applied onto brake discs on disc-brake pad pair." Metalurgija 48.3 (2009): 161-166.
Downloads
Published
How to Cite
Issue
Section
License
The scientific journal adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.
All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.
Copyright
Authors who publish their works in the journal “Problems of Friction and Wear”:
-
retain the copyright to their publications;
-
grant the journal the right of first publication of the article;
-
agree to the distribution of their materials under the CC BY 4.0 license;
-
have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.




