METHODOLOGICAL SUPPORT FOR RESEARCH ON THE FEASIBILITY OF USING HIGH-SPEED TOOL STEEL AS COATINGS IN FRICTION UNITS

Authors

DOI:

https://doi.org/10.18372/0370-2197.1(106).19827

Keywords:

composite materials, electron-beam surfacing, ion-electron microscope, interference microscope, profilometer

Abstract

The paper considers methods of research in the field of composite materials used as surfacing materials. In particular, the modern equipment used in the analysis of experimental samples obtained in the study of the use of tool high-speed steels as a coating applied by vacuum electron beam treatment in order to organize micrometallurgical processes with minimal impact on the base metal and the ability to form a hardened layer whose thickness is adjustable within wide limits is considered.

Author Biographies

Oleksandr Tamargazin, State University "Kyiv Aviation Institute"

Doctor of Technical Sciences, Professor, Professor of the Department of Airport Technologies, State University "Kyiv Aviation Institute", 1 Lubomyra Huzar Ave., Kyiv, Ukraine, 03058

Liudmyla Pryimak, State University "Kyiv Aviation Institute"

Candidate of Technical Sciences, Associate Professor, Associate Professor of the Department of Airport Technologies, State University "Kyiv Aviation Institute", 1 Lubomyra Huzar Ave., Kyiv, Ukraine, 03058

Illia Morshch, State University "Kyiv Aviation Institute"

postgraduate student of the Department of Airport Technologies, State University "Kyiv Aviation Institute", 1 Lubomyra Huzar Ave., Kyiv, Ukraine, 03058

References

Tamargazin, O.; Pryimak, L.; Morshch, I. Substantiation of Expediency of Use of Tool High-Speed Cutting Steels as Coatings in Friction Units / Проблеми тертя та зношування, 2024, 1(102), C. 4-13, DOI: 10.18372/2310-5461.61.18515

Shuili Gong, Jianrong Liu, Guang Yang, Haiying Xu Electron Beam Wire Deposition Technology and Its Application, Springer, National Defense Industry Press, 2022, 312 pp.

Jimei, Xiao ed. Alloying phase and phase transformation (Second ed.), Beijing: Metallurgy industry Publisher, 2004

John F. Watts, John Wolstenholme an Introduction to Surface Analysis by XPS and AES, 2003, 224 pp.

Rik Brydson Abberation-Corrected Analytical Transmission Electron Microscopy, 2011, 280 pp.

Raghavan V. Physical Metallurgy: Principles and Practice, 2015, 260 pp.

Downloads

Published

2025-04-03

How to Cite

Tamargazin, O., Pryimak, L., & Morshch, I. (2025). METHODOLOGICAL SUPPORT FOR RESEARCH ON THE FEASIBILITY OF USING HIGH-SPEED TOOL STEEL AS COATINGS IN FRICTION UNITS. Problems of Friction and Wear, (1(106), 78–86. https://doi.org/10.18372/0370-2197.1(106).19827

Issue

No. 1(106) (2025)

Section

Проблеми тертя та зношування

License

The scientific journal adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.

All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Copyright

Authors who publish their works in the journal “Electronics and control systems”:

  • retain the copyright to their publications;

  • grant the journal the right of first publication of the article;

  • agree to the distribution of their materials under the CC BY 4.0 license;

  • have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.