COMPUTER-AIDED DESIGN OF HYBRID POWER SYSTEMS OF UKRAINE

Authors

  • V. M. Sineglazov National Aviation University, Kyiv
  • A. T. Kot National Technical University of Ukraine “Ihor Sikorsky Kyiv Polytechnic Institute”

DOI:

https://doi.org/10.18372/1990-5548.61.14219

Keywords:

hybrid renewable energy system, computer-aided design, genetic algorithm

Abstract

It is shown that the problem of hybrid power systems creation is very important for Ukraine. The high quality of this problem solution can be achieved with help of computer-aided design systems. It is considered the modern. computer-aided design systems and executed their analysis. It is shown that they have some disadvantages. To overcome them it is developed a new hybrid genetic algorithm of unconditional multicriteria optimization, which is based on a new approach of equivalent transformation of conditional optimization problem into unconditional with further “curering” the Pareto optimal points which are located outside of area formed by restrictions. It is considered the examples of computer-aided design of hybrid power systems for different regions of Ukraine.

Author Biographies

V. M. Sineglazov, National Aviation University, Kyiv

Aviation Computer-Integrated Complexes Department, Faculty of Air Navigation Electronics and Telecommunications

Doctor of Engineering Science. Professor. Head of the Department

orcid.org/0000-0002-3297-9060

 

 

A. T. Kot, National Technical University of Ukraine “Ihor Sikorsky Kyiv Polytechnic Institute”

Technical Cybernetic Department

Post-graduate student

References

Nadeem Manhas, Gagan Deep Yadav, “A Review on Configurations, Control, and Future of Hybrid Renewable Energy Systems for Electric Power Generation,” International Research Journal of Engineering and Technology (IRJET. Volume: 03 Issue: 06 pp. 1018–1025, June-2016

Yasser Maklad, “Sizing and Costing Optimisation of a Typical Wind/PV Hybrid Electricity Generation System for a Typical Residential Building in Urban Armidale NSW, Australia” International Journal of Energy Economics and Policy, Vol. 4, No. 2, 2014, pp.163-168.

Francisco Joseґ Contreras Cordero, Optimization of Hybrid Renewable Energy Systems. A thesis submitted in conformity with the requirements for the degree of Master of Applied Science Graduate Department of Mechanical and Industrial Engineering University of Toronto, 2015, 49 p.

Binayak Bhandari, Kyung-Tae Lee, Gil-Yong Lee, Young-Man Cho, and Sung-Hoon Ahn, “Optimization of Hybrid Renewable Energy Power Systems: A Review,” International Journal of Precision Engineering and Manufacturing-Green Technology, vol. 2, no. 1, pp. 99–112, January 2015.

Swati Negi and Lini Mathew, “Hybrid Renewable Energy System: A Review,” International Journal of Electronic and Electrical Engineering. ISSN 0974-2174, Volume 7, Number 5 (2014), pp. 535-542, © International Research Publication House http://www.irphouse.com.

N. I. Pakulov, The majority principle of building reliable nodes and devices.: Sov. radio, 1974, 184 p. (in Russian).

Downloads

How to Cite

Sineglazov, V. M., & Kot, A. T. (2019). COMPUTER-AIDED DESIGN OF HYBRID POWER SYSTEMS OF UKRAINE. Electronics and Control Systems, 3(61), 43–49. https://doi.org/10.18372/1990-5548.61.14219

Issue

Vol. 3 No. 61 (2019)

Section

COMPUTER-AIDED DESIGN SYSTEMS

License

The scientific journal “Electronics and control systems” adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.

All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Copyright

Authors who publish their works in the journal “Electronics and control systems”:

  • retain the copyright to their publications;

  • grant the journal the right of first publication of the article;

  • agree to the distribution of their materials under the CC BY 4.0 license;

  • have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.