INTEGRATED MICROMECHANICAL GYROVERTICAL

Authors

  • M. K. Filyashkin National Aviation University, Kyiv, Ukraine

DOI:

https://doi.org/10.18372/1990-5548.55.12749

Keywords:

Accelerometer, acceleration, angular velocity sensor, angular orientation, compensation scheme, estimation, correction, calibration

Abstract

The dubiousness of instantiation of the gyroverticales which based on micromechanical
accelerometers and on micromechanical gyroscopic sensors is shown. Based on the analysis of the
frequency characteristics of the errors of micromechanical gyroscopes and accelerometers, the expediency of their integration using the method of mutual compensation is shown. The algorithms and results of
research of the integrated micromechanical gyroverticales which are based on compensation schemes with first-order and third-order dynamic filters with forcing are given. The approaches to the solution of the problem of the calibration integrated micromechanical gyroverticales in the flight are shown. The conducted researches of the proposed gyrovertical with the flight's calibration and with correction scheme showed good filtering properties and acceptable accuracy of measuring angular orientation parameters.

Author Biography

M. K. Filyashkin, National Aviation University, Kyiv, Ukraine

Aviation Computer-Integrated Complexes Department

Candidate of Science (Engineering). Professor

References

M. K. Filyashkin and M. P. Mukhina, “Gyro-accelerometric method of determination of angular orientation parameters,” Systems of Control, Naviga-tion and Communications, no. 2 (30), pp. 56–62, 2014.

V. O. Rogozhin, A. V. Skrypz, M. K. Filyashkin, and M. P. Mukhina, Stand-alone navigation systems for a concrete type of aircraft and their maintenance. NAU, Kyiv, 2015, 308 p.

MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking™ Devices https://www.invensense. com/products/motion-tracking/6-axis/mpu-6050/

M. K. Filyashkin and T. I. Maryasova, “Algorithms of suboptimal filtration in the schemes of integration of inertial-satellite systems by the method of compensation,” Electronics and Control Systems, no. 2 (28), pp. 100–106, 2011.

Downloads

How to Cite

Filyashkin, M. K. (2018). INTEGRATED MICROMECHANICAL GYROVERTICAL. Electronics and Control Systems, 1(55), 41–46. https://doi.org/10.18372/1990-5548.55.12749

Issue

Vol. 1 No. 55 (2018)

Section

COMPUTER-AIDED DESIGN SYSTEMS

License

The scientific journal “Electronics and control systems” adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.

All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Copyright

Authors who publish their works in the journal “Electronics and control systems”:

  • retain the copyright to their publications;

  • grant the journal the right of first publication of the article;

  • agree to the distribution of their materials under the CC BY 4.0 license;

  • have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.