ACOUSTIC EMISSION SENSORS, INTENDED FOR RESEARCH OF CUTTING

Authors

  • Л. М. Девін National Aviation University
  • М. Е. Стахнів National Aviation University
  • О. І. Бачкало National Aviation University

DOI:

https://doi.org/10.18372/2310-5461.1.5190

Keywords:

acoustic emission, cutting, frequency response, wave, steel, light, power

Abstract

The method of calibrating of acoustic emission sensors, intended for research of cutting, is considered, utilizing of high-frequency spectrum analyzer.

References

Девин Л. Н. Прогнозирование работоспособности металлорежущего инструмента. — К. : Наук. думка. 1992. — 131 с.

Подураев В. Н., Барзов А. А., Горелов В. А. Технологическая диагностика резания методом акустической эмиссии. — М. : Машиностроение, 1988. — 56 с.

Королев М. В., Карпельсон А. Е. Широкополосные ультразвуковые пьезопреобразователи. — М. : Машиностроение, 1982. — 157 с.

Баранов В. М. Акустические измерения в ядерной энергетике. — М. : Энергоиздат, 1990. — 320 с.

Орнадский П. П. Теоретические основы информационно-измерительной техники. — К. :Вища шк., 1976, — 432 с.

Філоненко С. Ф. Акустична емісія. Вимірювання, контроль, діагностика. — К. : КМУГА, 1999. — 312 с.

Downloads

How to Cite

Девін, Л. М., Стахнів, М. Е., & Бачкало, О. І. (2009). ACOUSTIC EMISSION SENSORS, INTENDED FOR RESEARCH OF CUTTING. Science-Based Technologies, 1(1), 79–81. https://doi.org/10.18372/2310-5461.1.5190

Issue

Vol. 1 No. 1 (2009)

Section

Engineering

License

The scientific journal adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.

All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Copyright

Authors who publish their works in the journal:

  • retain the copyright to their publications;

  • grant the journal the right of first publication of the article;

  • agree to the distribution of their materials under the CC BY 4.0 license;

  • have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.