FLOW OF A VISCOUS GAS IN A DIFFUSER CHANNEL WITH TURBULATORS
DOI:
https://doi.org/10.18372/2310-5461.34.11618Keywords:
public management, state informative resources, public information, public state informative resources, public informative system, system of public managementAbstract
A calculation series of flow in smooth diffusers with an opening angle α = 6 ... 40º was carried out. Turbulent separated flows were calculated using the averaged Navier-Stokes equations with the turbulence model SST. The results of flow numerical simulation in smooth diffusers have shown that at α> 20º there is a flow separation, which is accompanied by the formation of a back-circulation flow in the form of vortices. The energy losses increase with increasing of the angle o f the diffuser opening. The paper presents the results of a study of the effect of the density of the accommodation of turbulators in a diffuser channel with a large opening angle of the diffuser at Mach number M = 0.5. The characteristics of the diffusers were studied at a turbulator density coefficient of 0.5; 0.25; 0.125. The use of turbulators at the entrance section of the diffuser channel with a density coefficient of 0.125 ... 0.5 resulted in a decreasing of the value of the total pressure loss coefficient from 0.3 to 0.19 ... 0.22.
References
Чжен П. Управление отрывом потока / П. Чжен. – М.: Мир, 1979. – 552 с.
Терещенко Ю. М. Аэродинамическое совершенствование лопаточных аппаратов компрессоров / Ю. М. Терещенко. – М.: Машиностроение, 1987. – 168 с.
Терещенко Ю. М. Моделювання течії в компресорних решітках з турбулізаторами на поверхні лопаток / Ю. М. Терещенко, К.В. Дорошенко, Ю. Ю. Терещенко // Наукоємні технології. – 2016. – №. 3 (31). – P. 335–352, doi: 10.18372/2310-5461.31.10804 (ukr)
Back S. C. Effects of reynolds number and surface roughness magnitude and location on compressor cascade performance / S.C. Back, G.V. Hobson, S. J. Song, K.T. Millsaps // Journal of Turbomachinery. – 2012. – Vol. 134, Issue 5. – P. 051013-1–051013-6, doi: 10.1115/1.4003821 (eng)
Back S. C. Impact of surface roughness on compressor cascade performance / S.C Back, J. H. Sohn, S. J. Song // Journal of Fluids Engineering. – 2010. – Vol. 132, Issue 6. – P. 064502-1-064502-6, doi: 10.1115/1.4001788 (eng)
Yang H. The effect of blade profile parameter on thermodynamic performance parameter of axial flow compressor / H. Yang, H. Xu / International Journal of Computer Applications in Technology. – 2014. – Vol. 50, Issue 3-4. – P. 247-252, doi: 10.1504/IJCAT.2014.066736 (eng)
Taylor R. P. Surface roughness measurements on gas turbine blades / R. P. Taylor // Journal of Turbomachinery. – 1990. – Vol. 112, Issue 3. – P. 175–180, doi: 10.1115/1.2927630 (eng)
Bogard D. G. Characterization and laboratory simulation of turbine airfoil surface roughness and associated heated transfer / D. G. Bogard, D. L. Schmidt, M. Tabbita // Journal of Turbomachinery. – 1998. – Vol. 120, Issue 2. – P. 337–342, doi: 10.1115/96-GT-386 (eng)
Терещенко Ю. М. Моделирование течения в диффузоном канале с турбулизаторами / Ю.М. Терещенко, Е. В. Дорошенко, Л. Г. Волянская // Восточно-европейский журнал передовых технологий. – 2013. - №4/7(64). – С.36-38. (rus)
Downloads
How to Cite
Issue
Section
License
The scientific journal adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.
All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.
Copyright
Authors who publish their works in the journal:
-
retain the copyright to their publications;
-
grant the journal the right of first publication of the article;
-
agree to the distribution of their materials under the CC BY 4.0 license;
-
have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.
