FORCED COOLING OF BRAKE FRICTION UNITS (part 2)

Authors

DOI:

https://doi.org/10.18372/0370-2197.3(104).18997

Keywords:

disc (tubular type) - shoe brake, main and additional discs with chambers, nanofluid, thermal balance

Abstract

Experimental design developments and theoretical studies of disk (tubular type) - shoe brakes of drilling winches with forced nano-liquid cooling in any state of the unit allowed: to propose a workable design of a tubular-type disk-shoe brake, which is a new direction in brake engineering for drilling equipment, since it has increased energy capacity; to divide the functions between the main and additional disks, the first is a brake, and the second is a heat exchanger; based on the thermal balance of the main brake disk, determine the heat exchange surface area of ​​the additional disk; to connect the volumes of the chambers of the main and additional disks with each other by diffusers and confusers located on semicircles, which are a kind of accelerators and retarders of heat exchange processes; to make the brake disc friction belt thin-walled and thus ensure minimal surface-volume temperature gradients during frictional electrothermomechanical interaction with the linings, and as a consequence, small equivalent stresses.

Author Biographies

Myroslav Kindrachuk, National Aviation University

Corresponding Member of the National Academy of Sciences of Ukraine, Doctor of Science. tech. Sciences, Professor of the Department of Applied Mechanics and Materials Engineering, National Aviation University, Lyubomir Guzar Ave., 1, Kiev, Ukraine

Dmytro Volchenko, Ivano-Frankivsk National Technical University of Oil and Gas

Dr. tech. Sciences, Professor of the Department of Oil and Gas Production, Ivano-Frankivsk National Technical University of Oil and Gas, st. Karpatska, 15, Ivano-Frankivsk, Ukraine, 76019

Andrii Voznyi, Ivano-Frankivsk National Technical University of Oil and Gas

PhD, associate professor of the Department of Information and Telecommunication Technology and Systems, Ivano-Frankivsk National Technical University of Oil and Gas, str. Karpatska, 15, Ivano-Frankivsk, Ukraine, 76000

Yevgen Andreychikov, Ivano-Frankivsk National Technical University of Oil and Gas

lieutenant colonel, senior lecturer of the Department of Military Training, Ivano-Frankivsk National Technical University of Oil and Gas, str. 15 Karpatska Street, Ivano-Frankivsk, Ukraine, 76019

Oleksandr Vudvud, Odesа Polytechnic National University

PhD, Head of Department of Hoisting and Conveying Machines and Robotics Equipment, Odesа Polytechnic National University, Odesa, Shevchenko av., 1, Ukraine, 65044

Serhii Skochko, Kharkiv National Automobile and Road University

postgraduate student of the Department of Road and Road Machines, Kharkiv National Automobile and Road University, vul. Yaroslav the Wise, 25, Kharkiv, Ukraine, 61001

References

Aliev A.M. Povishenie energoemkosti friktsionnikh tormozov dlya spusko-podemnikh operatsii / A.M. Aliev // Vestnik Azerbaidzhanskoi inzhenernoi akademii. t.10, №4. 2018. – S. 17-22.

Volchenko, N.; Volchenko, A.; Volchenko, D.; Polyakov, P.; Malyk, V.; Zhuravlev, D.; Vytvytskyi, V.; Krasin., P. Features of the Estimation Jf the Intensity of Heat Exchange in Self-Ventilated Disk-Shoe Brakes of Vehicles. East. Eur. J. Enterp. Technol. 2019, 1, 47–53.

Diskovie i diskovo-kolodochnie tormoza v mashinostroenii / A. Kh. Dzhanakhme-dov, D. A. Volchenko, N. A. Volchenko [i dr.] // Tom 2. Baku: «APOSTROF-A», 2021. – 392 c.

Vinnitskii M. M. Ratsionalnoe upravlenie spusko-podemnimi operatsiyami / M. M. Vinnitskii // M.: Nedra. – 1978. – 252 s.

Spravochnik po tribotekhnike: V 3-kh t. // Pod obshchei red. M. Khebti, A. V. Chichi-nadze. – T. 1. – Teoreticheskie osnovi. – M.: Mashinostroenie, 1989. – 400 s.

Skrypnyk V. S. Naukovo-metodolohichni zasady systemotekhniky pry doslidzhenni fryktsiinykh halm burovykh lebidok: dys. … dokt. tekhn. nauk: 05.05.05 / Skrypnyk Vasyl Stepanovych. Odesa. 2019. 278 s.

Chufus V. S. Intensyfikatsiia okholodzhennia fryktsiinykh vuzliv strichkovo-kolodkovykh halm burovykh lebidok dlia pidvyshchennia yikh efektyvnosti: dys. … kand. tekhn. nauk: 131 - prykladna mekhanika / Chufus Vasyl Mykhailovych. Ivano-Frankivsk. 2021. 233s.

Kernytskyy, I.; Volchenko , A.; Szlachetka, O.; Horbay O.; Skrypnyk, V.; Zhuravlev, D.; Bolonnyi, V.; Yankiv, V.; Humenuyk, R.; Polyansky, P.; Le´sniewska A.; Walasek, D.; Koda, E. Complex Heat Exchange in Friction Steam of Brakes. Energies 2022, 15, 7412, 1 – 11.

Downloads

Published

2024-10-07

How to Cite

Kindrachuk, M., Volchenko, D., Voznyi, A., Andreychikov, Y., Vudvud, O., & Skochko, S. (2024). FORCED COOLING OF BRAKE FRICTION UNITS (part 2). Problems of Friction and Wear, (3(104), 122–131. https://doi.org/10.18372/0370-2197.3(104).18997

Issue

No. 3(104) (2024)

Section

Проблеми тертя та зношування

License

The scientific journal adheres to the principles of Open Access and provides free, immediate, and permanent access to all published materials without financial, technical, or legal barriers for readers.

All articles are published in Open Access under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Copyright

Authors who publish their works in the journal “Problems of Friction and Wear”:

  • retain the copyright to their publications;

  • grant the journal the right of first publication of the article;

  • agree to the distribution of their materials under the CC BY 4.0 license;

  • have the right to reuse, archive, and distribute their works (including in institutional and subject repositories), provided that proper reference is made to the original publication in the journal.